3D Printing Projects

Display Adafruit IO data on any DVI or HDMI display with the Raspberry Pi Pico W and Adafruit’s Pi CowBell DVI Output! Guide: https://learn.adafruit.com/dvi-io Using this Pico DVI AIO project, we’re able to display data from multiple sensor nodes on our HDMI monitor. This is a great way to display sensor data on any HDMI TV especially for workshops or educational office spaces!

Build an internet connected battery charger and monitor with Feather ESP32-S2 Reverse TFT, CircuitPython, and Adafruit IO. The on-board MAX17048 LiPoly battery monitor chip reads the batteries voltage and is displayed on the Feather ESP32's built-in color TFT display. Use the on-board button to cycle between icons and text. The project uses Adafruit IO actions to receive an SMS tex

You can develop Raspberry Pi Pico W projects with Adafruit’s PiCowBell Proto Boards. Guide: https://learn.adafruit.com/PiCowBell-Doubler-Brick-Plates The PiCowBell Doubler features STEMMA QT, a reset button, socket headers and lipo battery charging. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.

You can build an internet connected bird feeder camera with Adafruit IO and CircuitPython.This project captures images of birds that you can view on an Adafruit IO feed or dashboard. We designed and 3D printed a bird feeder to house the Adafruit MEMENTO, a large battery, and a PIR sensor. It’s got a tray for holding bird seeds and a perch so birds alike can visit and have a meal.

This is MEMENTO, Adafruit’s DIY programmable camera dev board. With MEMENTO, you can take photos using the Fancy camera software with CircuitPython. You take photos and save them as JPEGs or animated GIFs. You can even apply image filters like this GameBoy-like effect. You can use the built-in buttons to change settings like the photo resolution and switch between different image

Build an interactive robot that tracks your face using Memento Adafruit's DIY camera dev board! Guide: https://learn.adafruit.com/face-tracking-robot-with-memento A servo moves the robot's head and actually follows your face. When the robot detects your face, a NeoPixel ring lights up making this feel like an interactive companion robot. Visit the Adafruit shop online - http://www.

3D Print an enclosure to fit the ItsyBitsy ESP32 with a wFL antenna! https://learn.adafruit.com/itsybitsy-esp32-wfl-case With a WiFi connection, you can use CircuitPython Web Workflow to program and debug your dev board. This works great with any WiFi-enabled computer or mobile device! It’s also compatible with the WLED firmware so you can build advanced lighting projects with Ne

You can build a digital clock with a large 7-segment display, a Feather RP2040, and CircuitPython -- no internet required! For time keeping, this build uses the DS3231 Real Time Clock module for precise and accurate timing. Full Tutorial https://learn.adafruit.com/digital-clock-with-circuitpython/ Code on GitHub https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/

Build a simple IoT doorbell camera using Adafruit's MEMENTO. Press a mini LED arcade button to snap a photo and display it on an Adafruit IO Dashboard. The electronics are housed in a 3D printed snap fit enclosure. Learn Guide: https://learn.adafruit.com/diy-iot-doorbell-camera-with-memento/ Memento https://www.adafruit.com/product/5420 420mah Battery https://www.adafruit.com/produ

Build a remote shutter button for the Adafruit MEMENTO camera! Guide: learn.adafruit.com/memento-shutter Our 3D printed snap fit enclosure houses the button PCB and doubles as a handle so you can take photos without any camera shake. This button PCB features an on-board JST PH connector making it easy to connect to the MEMENTO camera board. -----------------------------------------