Sep 19 2020 21 mins 11
The Great Search: 5V Boost for CAN Bus Transceiver https://www.digikey.com/short/z2rt3m Today we were working on an all-in-one CAN bus Feather. CAN bus is a protocol with a hardware signalling layer that is specified for 5V logic, and there's a 120 ohm termination resistor that means we will need at least 50mA for the signalling control. Let's find a DC/DC converter that will get us a nice clean 5V with minimal cost and complexity on Digi-Key! LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
